Problems surface as downtime
Data sits on each site, so the first sign of trouble is the outage itself — not a warning you could have acted on.
Measure. Manage. Maximize.
Every site you run, on one screen. Under control.
NeoTAQ is the only vendor covering all three sectors (energy + telecom + industrial) with its own hardware and software across Asia, GCC and Africa. An energy intelligence platform for solar monitoring software, industrial energy monitoring and remote monitoring — built for energy portfolio management and operational excellence across every site.
Trusted by teams across the UAE, Pakistan and the wider region
Measure
You measure plenty. You only see part of it.
Distributed sites generate readings all day. Almost none of it reaches one place in time to act on. The gaps cost you before you ever see them.
Assets fail silently
Batteries and inverters die between site visits, riding on luck until someone notices.
OPEX leaks quietly
Diesel and running costs drift, with no single view to catch where the money is going.
The bill is one number
A month of operations arrives as a single figure. No one can say what a ton of output actually costs in energy.
- NeoTAQ is the only platform in the region that pairs its own edge hardware with cloud software — one vendor owns the full stack from the asset to the dashboard.
- The same software stack across energy, telecom and industrial sites. One login, one team, one contract.
- NeoTAQ doesn't just monitor — it controls. neoSync manages hybrid solar diesel, neoES dispatches BESS, neoEV manages charging. All from one platform.
Manage
NeoTAQ pulls every site into one place.
The scattered readings from a moment ago — the silent failures, the leaking OPEX, the one-number bill — become one live picture you can act on.
See every site, live, in one view
Every asset on every site reports into one place: status, performance and alerts, current and historical. The blind spots close.
See the platform behind itRuns on the equipment you already have
It sits on top of your inverters, gensets, meters and PLCs — whatever the brand. Nothing to rip out.
Visibility and control, together
Not just a screen that reports. You act on what you see — remotely, the moment it matters.
Maximize
What changes once you can see everything.
Higher uptime
Failing batteries, drifting inverters, sites trending toward an outage — surfaced as alerts while there is still time to act, not as downtime after the fact.
Lower OPEX & fuel
Cut truck rolls and trim diesel with visibility across the fleet.
Specific energy per ton
See exactly how much energy each ton of output costs to make.
Request a Demo
Case study
Industry Pakistan
The monthly bill became a per-stage map of cost.
One incomer fed every stage of a large rice-processing facility, so energy arrived as a single monthly number nobody could act on. NeoTAQ metered each stage and tied consumption to throughput — now every line reports its own kWh per ton, and the stages worth fixing first are obvious.
“For the first time we could see which stage was eating the energy, not just that the bill was high.”
Specific energy, per processing stage
50 kWh / ton
Specific energy per stage at our flagship rice mill
Illustrative view Read by neoCore · analyzed in neoSphere
The system
One continuous system, from the asset to the answer
Every reading starts at the asset, is captured at the site edge by neoCore, visible in neoView at the site, and arrives in the neoSphere cloud. One path, always in sync, even when the link drops.
-
Your assets
PV, BESS, gensets, grid and meters
-
On-site edge
neoCore reads every asset where it runs
-
neoView
On site monitoring at the asset
-
neoSphere cloud
Fleet analytics and AI insight, anywhere
One platform, three operating realities
Three sectors, three completely different operating days, served from the same edge-to-cloud platform. Each gets exactly what its sites demand.
Energy
Solar, hybrid, BESS, genset and grid. Every site in one view, failures caught before downtime. From a single rooftop array to a large hybrid plant, neoSphere shows the full picture live.
PVBESSgensetgridwindEV
Explore Energy
Telecom
Tower sites at fleet scale: fuel, batteries and remote diagnostics without the truck roll. Find the failing site before it goes dark.
Explore TelecomIndustry
Manufacturing, oil and gas, agri processing and utilities. neoCore reads from existing SCADA, HMI and PLC systems. No new infrastructure.
Explore IndustryneoSphere
See it. Run it. Outsmart it.
The cloud platform scales in three additive tiers, each doing everything below it and more.
-
See
neoSphere Monitor (See)
- Live dashboards, alarms and history
- Every device and meter in one view
- Monitor +
Run
neoSphere Operate (Run)
- Fleet comparison and benchmarking
- Automated, engineering-grade reports
- The KPI reports you build by hand
- Operate +
Outsmart
neoSphere Intelligence (Outsmart)
- AI anomaly detection
- Automated root-cause diagnosis
- Every lost kWh, quantified
- Predictive, money-first insight
From first call to a live pilot
No lengthy RFI. See it run against sites like yours, then start measuring on one of your own.
Book a demo
See NeoTAQ run against the kind of sites you operate.
- A live walkthrough, not a slide deck
- Bring your hardest site to test
- No lengthy RFI to get started
We map it to your sites
Your assets, your metrics. Configured to how you measure.
- Connects over Modbus RTU/TCP and OPC UA
- Sits on the equipment you already run
- Tracked to your KPIs: uptime, fuel, kWh/ton
Pilot deployment
Start measuring on a first site, then scale across the fleet.
- Begin with a single site
- Prove it on your own data
- Scale across the fleet when ready
Where to meet us
Find the team in person at these upcoming events.
- Meet us there
Solar & Storage Live KSA 2026
23–25 November 2026Riyadh Front, Riyadh
Questions buyers ask us
See NeoTAQ run on sites like yours and get answers mapped to your setup.
What does NeoTAQ do?
NeoTAQ is an energy intelligence platform that monitors and controls solar, BESS, genset and grid assets across energy, telecom and industrial sites. It runs from an on-site edge through the neoSphere cloud — asset performance management from the asset to the dashboard.
Where is NeoTAQ based?
NeoTAQ Systems Limited is headquartered in Masdar City, Abu Dhabi, United Arab Emirates.
Which assets can it monitor?
Solar PV, battery storage, gensets, grid connections and the industrial loads around them. The mix of equipment already on your sites.
How is it different from a dashboard?
It does more than show readings: NeoTAQ measures down to specific energy per ton, predicts failures, and lets you act remotely. One remote monitoring platform across energy, telecom and industry.
Does it work with my existing equipment?
Yes. NeoTAQ is built to sit on top of the equipment you already run, so you do not replace what works to gain visibility over it.
Can I see it before committing?
Request a demo and we will show it against sites like yours, map it to your assets, then start with a pilot deployment before any wider rollout.
Where does NeoTAQ operate?
NeoTAQ is deployed across three regions — Asia (Pakistan, Afghanistan, Bangladesh), the GCC (UAE, Saudi Arabia, Qatar, Kuwait, Oman, Bahrain) and Africa (Nigeria, Kenya, Ghana, Egypt, Lebanon). The platform is designed for distributed energy and telecom infrastructure in any market.
Is NeoTAQ available in Pakistan?
Yes. Pakistan is NeoTAQ's primary operational market with 50+ active client sites across energy, telecom and industrial sectors. The team has direct on-ground presence for deployment and support.
Does NeoTAQ cover the GCC?
Yes. NeoTAQ is deployed across the UAE, Saudi Arabia, Qatar, Kuwait, Oman and Bahrain, covering solar, hybrid, BESS and telecom tower sites. The platform connects to all major equipment brands with no rip-and-replace.
Is NeoTAQ available in Africa?
Yes. NeoTAQ covers solar, off-grid hybrid and telecom tower sites across Sub-Saharan and North Africa including Nigeria, Kenya, Ghana and Egypt. The platform runs on 4G connectivity, making it suitable for remote sites without fixed internet.
Which countries in Southeast Asia does NeoTAQ support?
NeoTAQ's platform is designed for deployment across Southeast Asia including the Philippines, Indonesia, Malaysia, Myanmar and Thailand — markets with strong off-grid solar and hybrid energy adoption and large telecom tower fleets.
Does NeoTAQ work in Bangladesh and Myanmar?
Yes. NeoTAQ supports solar, hybrid and telecom monitoring deployments across Bangladesh and Myanmar, where off-grid and bad-grid conditions make remote monitoring critical for operational continuity.